Save 23%

FOUR POST LIFT WITH JACKING BEAM 5 TONNE AECL450JB

FOUR POST 5 TONNE WHEEL ALIGNER LIFT WITH JACKING BEAM AECL250JB

Designed for the workshop dedicated to helping their customers to maintain their safety by providing an extensive full vehicle check. As well as maintaining the engine and drive train, the use of a wheel aligner lift allows the professional technician to thoroughly examine the drive train, body and suspension thus saving the need for expensive maintenance work when early warning signs are not identified.

List price: $13,850.00  
$10,640.00
($11,704.00 inc tax) You save: $3,210.00 (23%)
AECL250JB
In stock

Minimum quantity for "FOUR POST LIFT WITH JACKING BEAM 5 TONNE AECL450JB" is 1.

OUR POST 5 TONNE LIFT WITH JACKING BEAM AECL250JB

Designed for the workshop dedicated to helping their customers to maintain their safety by providing an extensive full vehicle check. As well as maintaining the engine and drive train, the use of a 4 post lift allows the professional technician to thoroughly examine the drive train, body and suspension thus saving the need for expensive maintenance work when early warning signs are not identified.

Features

l 5 Tonne lifting capacity;

l Automatic lock release, one button operation, the lift in 24 Volt control box, for easy and efficient use;

l Lock ladder column design, reliable mechanical safety lock system;

l Avoids rapid descending cause by leakage of hydraulic system by applying the flow-control technique to hydraulic system;

l Maximum height switch limit the travel of runways and ensures cylinder work within the stroke;

l The operator protects against damage and injury,by using the alarm buzzer in the down process;

l Low profile runway is convenient for driving on and off and less demanding on space;

l Can satisfy service work for passenger cars, SUVs and Pick-up trucks;

l Includes 4 pieces adapter rubber pads;

l With rolling jack and t pneumatic hydraulic pumps;


Technical Specifications

Model No.

50EA

Lifting Capacity

5000 kg

Maximum Lifting Height

1800 mm

Minimum Height

184mm

Lifting Time

55-60 Sec

Lowering Time

48-55 Sec.

Overall Height

2250 mm

Overall Width (Without Hydraulic Pump)

3389 mm

Overall Width (With Hydraulic Pump)

3645 mm

Overall Length (Without Ramps)

4885 mm

Overall Length (With Ramps)

5705 mm

Width Between Runway

910 mm

Runway Width

550 mm

Runway Length

4600 mm

Air Supply

6-8 bar

Read Oil Pressure

20 Mpa

Motor Power

3.0 KW

Electricity Supply

415V/50Hz/3Phase

Net weight

1350 kg

Shipping Weight

1420 kg

*Lift colour may vary depending availability

These lifts meet the Australian Standard AS/NZ 1418.9:1996 and AS/NZS 2550.9:1996,

FINANCE AVAILABLE AT VERY COMPETITIVE RATES

PURCHASE BEFORE JUNE 30 FOR A TOTAL TAX DEDUCTION