Save 3%

TRUCK LIFT AETL4200 Long Platform Heavy Duty Four post 20 tonne truck lift

4 post hoist 4 post lift
List price: $44,392.80  
($47,141.60 inc tax) You save: $1,536.80 (3%)
Out of stock

AETL4200 Heavy Duty Four Post 20 Tonne Truck Lift


  • Hydraulic & transmission type
  • Automatic safety locks with air operated lock release
  • Four post large 20 tonne lifting capacity
  • Open front design for easy under-vehicle access
  • 3 years warranty on steel and 1 year on electrics and hydraulics
  • Special safety device against chain breaking is installed to ensure safe and reliable operation
  • Electronic release protection device
  • Integrated docking platform, easier to use and better overall effect
  • Self-lubricating bearing design ensures vehicle in any lifting height safety
  • Mechanical safety lock automatically every 50 mm engaged when lifting
  • Single point controller
  • Accommodates a wide range of wheel bases
  • Double limit switches, more secure and reliable
  • Oil drip tray protects the vehicle below from being contaminated
  • Dynamically tested with 115% of rated capacity and static test with 150% of rated capacity.
  • CE certificated
  • Easy to install
Technical Specifications
Item No. AETL4200
Maximum Lifting Capacity 20 Tonne
Maximum Lifting Height 1800 mm
Rolling Jack Rise Capacity 10 Tonne
Rolling Jack Rise Height 350 mm
Lifting Time 65-70 Sec.
Lowering Time 55-60 Sec.
Runway Length 9000 mm
Runway Width 700 mm
Motor Power 3.5 kw
Electricity Supply 415VAC/50Hz/3Ph
Capacity 10 Tonne Rolling Jack 1 Piece
Lock Release Manual Release
Warranty 3 Year Structural,1 Year Hydraulic & Electric
Packing Size 9860×3810×2032 mm & 540x430x1100 mm
Color: RAL5015 Blue For Columns & Platforms, Yellow For 2 PCS Ramps & 2 PCS Brake Plate


1. Press motor button to raise the lifter.

2. Toggle down the handle of the manual directional control valve at the pump station to unload oil

cylinder and lower down the tray to declining the lift.

3. The operation voltage of hydraulic pump is 24v.

4. The safety device against chain breaking has a manual plate clip structure. It is installed on both

ends of the lifting beam. When the chain is broken, the claw clip on both ends of the lifting beam

will set against the plate clip to prevent the tray from falling down the ensure safety to people, equipment and vehicle.

5. Anti-shake wheel


These lifts meet the Australian Standard AS/NZ 1418.9:1996 and AS/NZS 2550.9:1996,

You may also be interested in the following product(s)