Save 9%

4 POST 4 TONNE WHEEL ALIGNER LIFT WITH JACKING BEAMS AECL4400WA

Four post wheel aligner 4 tonne lift Designed for the workshop dedicated to helping their customers, ensuring their safety by providing extensive full vehicle checks. The use of a 4 post lift allows the professional technician to thoroughly examine the engine, drive train, body and suspension thus saving the need for expensive maintenance work when warning signs can be detected and early rectification carried out.

List price: $12,700.00  
$11,620.00
($12,782.00 inc tax) You save: $1,080.00 (9%)
AWCL440WA
In stock

Minimum quantity for "4 POST 4 TONNE WHEEL ALIGNER LIFT WITH JACKING BEAMS AECL4400WA" is 1.

Work on all cars and light commercial vehicles with ease with this 4 tonne wheel aligner lift

4 TON 4 POST LIFT, Pneumatic Safety Lock Release, With 24 Volt Control Box overall width 3800mm, overall length 4610 mm

FOUR POST LIFT 4 TONNE WITH ROLLING JACKING BEAMS AECL440WA

Designed for the workshop dedicated to helping their customers, ensuring their safety by providing extensive full vehicle checks. The use of a 4 post lift allows the professional technician to thoroughly examine the engine, drive train, body and suspension thus saving the need for expensive maintenance work when warning signs can be detected and early rectification carried out.
FEATURES:
  • CE Certified suitable for vehicle repair and maintenance service workshops
  • 4 Tonne lifting capacity
  • 2 tonne Jacking beams.
  • Manual single point lock release, easy to operate
  • Aluminum shell motor prevents overheating.
  • Low profile, minimum height is 325 mm.
  • The heavy duty steel wire drum, ensures the vehicles safety.
  • Adjustable runways make the lift suitable for a greater range of vehicles.
  • The automatic operated mechanical lock engages every 50 mm in the lifting process to ensure the vehicle lifting safety.
  • Runway synchronizer system prevents vehicles from tilt possibly.
  • The hydraulic system is equipped with device for over-load prevention.
  • Protection against steel rope breakage device provided.
  • 24V safety voltage used for control system.
  • Can satisfy service work for most passenger cars, SUVs and Pick-up trucks
  • 4 pieces rubber adapter pads
  • Routine testing with 115% dynamic and 150% static loading.

TECHNICAL SPECIFICATION:

Model No.

AECL4600WA

Lifting Capacity

4000 kg

Maximum Lifting Height

1800 mm

Minimum Height

235 mm

Lifting Time

55-60 Sec

Lowering Time

48-55 Sec.

Overall Height

2220 mm

Overall Width (Drive through)

3389 mm

Overall Width (With Hydraulic Pump)

3645 mm

Overall Length (Without Ramps)

4610 mm

Overall Length (With Ramps)

5683 mm

Width Between Runway

910 mm

Runway Width

550 mm

Runway Length

4610 mm

Air Supply

6-8 bar

Read Oil Pressure

20 Mpa

Motor Power

2.2 KW

Electricity Supply

415V/50Hz/3Phase

Australian Standard AS/NZ 1418.9:1996 and AS/NZS 2550.9:1996,

FINANCE AVAILABLE AT VERY COMPETITIVE RATES

http://www.autoequipaustralia.com.au/finance/

You may also be interested in the following product(s)