Save 40%

VEHICLE SMOKE LEAK DETECTOR AESE509

What Is Smoke Leak Diagnostic? Leaks can cause problems for vehicles, but not all leaks are fluid leaks. Most leaks can be gas or air leaks. Unmeasured air flow through your engine throws off the fuel to air ratio. It leads to poor engine performance, for example Increase in fuel consumption, lack of power, noise, shaking… Smoke Leak detection can also be used to find those annoying wind noises in the vehicle cabin

List price: $1,045.00  
$625.00
($687.50 inc tax) You save: $420.00 (40%)
AESE509
In stock

Minimum quantity for "VEHICLE SMOKE LEAK DETECTOR AESE509" is 1.

What you need to know before you purchase a smoke leak detector / locator


What Is Smoke Leak Diagnostic? Leaks can cause problems for vehicles, but not all leaks are fluid leaks. Most leaks can be gas or air leaks. Unmeasured air flow through your engine throws off the fuel to air ratio. It leads to poor engine performance, for example Increase in fuel consumption, lack of power, noise, shaking… Smoke Leak detection can also be used to find those annoying wind noises in the vehicle cabin.

To prevent further damage to the vehicle’s performance, it is important to run a smoke leak test on your car to ensure that it is safe to drive with no dangerous leaks. The Smoke Leak Locator is a valuable tool for mechanics because it helps identify issues and will help prevent any other serious damage happening through negligence. It is common for the Check Engine light to illuminate when the car is started and to remain on, indicating that a problem exists. If you’re uncertain of a leak occurring in your car, get it checked out today to prevent future damage.

What is EVAP and TURBO?



EVAP system (Evaporation Emission Control System) usually works in low pressure from -3.5Kpa to 3.5Kpa (-0.5psi~0.5psi), and never over the 30Kpa (4.35psi). In the EAVAP system very small leaks even 0.01 inch will cause of Engine Check Light on. You must repair the leaks then the engine works well.



The other systems work in the higher pressure from 3~20psi, so we called them “TURBO” in total. The leak test happened to these systems need the variable pressure to get the accurate results.

Top 4 Reasons To Have Smoke Leak locator:

Diagnostic Scanner only does the half of work: The scanner can only tell the failure or incorrect data of sensors, but won’t tell you why causing warning light on and where is the problem.


Over 60% of DTCs (Diagnostic Trouble Code) are pressure related: Incorrect Air Pressure or Oil Pressure generated 60% of DTCs, the root of reasons are leaks, with Smoke Leak Locator, you could easily find where the leak is and fix it.


Less Time And Less Work: Help the technician to find the problems faster and easier, save time and work, no any wrong or extra guess work. More happy Customers!

Make Your Shop More Professional And Reliable: Using soap bubble to find a leak is out of date, Smoke Leak Locator make you look more professional and confident when facing customers, worthy of investment!

Application and Guide

Quickly And Accurately test the integrity of:

ü Complete Fuel Vapor Recovery (EVAP) system

ü Complete Exhaust System (Diesel or Gasoline)

ü Complete Intake System (gasoline, alternative fuel, diesel)

ü Turbo and Turbo Housings

ü Charge Air Coolers

ü All Boosted Engines

ü Diesel Particulate Filter DPF system

ü Diesel Emission System

ü All without dyes or contaminants so it’s safe for the vehicle, safe for the technician and safe for the environment.


Dual Purpose Diagnostic Leak locator

SmokElite SE509 EVAP & TURBO 2 In 1


For the first time ever, technicians now have the ability to do ALL types of diagnostic leak detection with a single machine: Both low pressure for traditional vehicle EVAP and general repair; and variable high pressure for TURBO, diesel, and heavy duty testing. Use either visible smoke or air only. All with ONE innovative, state-of-the-art piece of equipment. SE509 gives technicians the ability to switch from low pressure to high pressure, to have access to the full range of testing pressures for different applications, with literally the flip of a switch.

Features:

EVAP & TURBO 2 In 1 Design: Locate the leaks in either low pressure systems like EVAP or higher pressure TURBO systems. Adjustable pressure setting allows technician to find all types of leaks in just one single machine.

Onboard Micro Air Compressor: Allows for full portability around the workshop or in remote locations.

Variable Flow Control: Detect the leaks as tiny as 0.01” in any sealed systems, helps you pinpoint the leaks fast by manipulating the smoke output.

Pressure Decay Test: Improves the accuracy of repairs and eliminates the comebacks by verifying that leaks are repaired completely and accurately at the first time.

Smart Smoke / Air Mode Design: 5-Minutes smoking and Air Mode in cycle. Air mode to know if there is leaks, Smoking mode to know where leaks is.

Instant Smoke Generation: Smoke output flow rate up to 10L/minute.

Visual Monitoring: Have a clear idea about the pressure status, flow status and fluid level, no more guesswork.

Various Fittings: Come up with everything you need to get job done. Super long 3 meter smoke outlet hose advantage for heavy duty trucks.

Simple to operate: Save time and make you money.

Compact Lightweight Design: At 6Kg, SmokElite is ultra-portable and let the technician to go where the work is. Perfect for mobile repairs, field service and fleet repairs.

SmokElite SE507 TURBO



Operating at high pressure than EVAP system (Evaporation Emission Control System), SE507 is perfect to find all types of leaks in Petrol or Diesel TURBO systems. The smoke vapour may find the leaks in many sealed systems such as Vacuum, Oil, Turbos and Intercoolers, Manifolds, Brake Boosters, EGR Valves, Seals, Gaskets, Brake Vacuum Hoses, Cooling Systems, Wind and Water Leaks, Diaphragms, Central Locking Systems and much more.

Features:

Onboard Micro Air Compressor: Allows for full portability around the workshop or in remote locations.

Variable Flow Control: Detect the leaks as tiny as 0.01” in any sealed systems, helps you pinpoint the leaks fast by manipulating the smoke output.

Pressure Decay Test: Improves the accuracy of repairs and eliminates the comebacks by verifying that leaks are repaired completely and accurately at the first time.

Smart Smoke / Air Mode Design: 5-Minutes smoking and Air Mode in cycle. Air mode to know if there is leaks, Smoking mode to know where leaks is.

Instant Smoke Generation: Smoke output flow rate up to 10L/minute.

Visual Monitoring: Have a clear idea about the pressure status, flow status and fluid level, no more guesswork.

Various Fittings: Come up with everything you need to get job done. Super long 3 meter smoke outlet hose advantage for heavy duty trucks.

Simple to operate: Save time and make you money.

Compact Lightweight Design: At 5.5 Kg, SmokElite is ultra-portable and let the technician to go where the work is. Perfect for mobile repairs, field service and fleet repair.


SmokElite SE505 EVAP

The SE505 Smoke leak locator is specially designed to locate the leaks of EVAP system and other systems working in low pressure. Its build-in micro air compressor and pressure regulator, output 0.75 PSI air. SE505 comes with a small-range pressure gauge and flow meter, which can detect leaks as tiny as 0.010” in any sealed system, helps you pinpoint leaks fast by manipulating the smoke output. The smoke vapour may find the leaks in many sealed systems such as Vacuum, Oil, Turbos and Intercoolers, Manifolds, Brake Boosters, EGR Valves, Seals, Gaskets, Brake Vacuum Hoses, Cooling Systems, Wind and Water Leaks, Diaphragms, Central Locking Systems and much more.

Features:

Onboard Micro Air Compressor: Allows for full portability around the workshop or in remote locations.

Variable Flow Control: Detect the leaks as tiny as 0.01” in any sealed systems, helps you pinpoint the leaks fast by manipulating the smoke output.

Pressure Decay Test: Improves the accuracy of repairs and eliminates the comebacks by verifying that leaks are repaired completely and accurately at the first time.

Smart Smoke / Air Mode Design: 5-Minutes smoking and Air Mode in cycle. Air mode to know if there is leaks, Smoking mode to know where leaks is.

Instant Smoke Generation: Smoke output flow rate up to 10L/minute.

Visual Monitoring: Have a clear idea about the pressure status, flow status and fluid level, no more guesswork.

Safety guaranteed: Low pressure stabilizer inside makes sure no any harm or damage to EVAP system components.

Various Fittings: Come up with everything you need to get job done. Super long 3 meter smoke outlet hose advantage for heavy duty trucks.

Simple to operate: Save time and make you money.

Compact Lightweight Design: At 5.5 Kg, SmokElite is ultra-portable and let the technician to go where the work is. Perfect for mobile repairs, field service and fleet repairs.

ACCESSORIES





You may also be interested in the following product(s)